How to Install a Remote Control Helicopter Training Kit

Written by larry simmons
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Install a Remote Control Helicopter Training Kit
Learn to fly your RC helicopter expertly with a training kit. (Helicopter image by Dusi from

Learning to operate a remote controlled helicopter takes time and practice. Installing a remote control helicopter training kit onto the skids of your RC helicopter can aid in the learning process. The training undercarriage provides a larger base beneath the helicopter, giving you room for under- and over-control during take-off and landings. A £3 training kit could save you hundreds of dollars in repairs.

Skill level:
Moderately Easy

Other People Are Reading


  1. 1

    Attach the four clips onto each of the skids. Place the rounded portion of the clip so that it lies atop the horizontal skid, with the curve wrapping around the bar. The curved point between the eyelets on the clips should wrap around the inside of the skid support, locking the clip into place.

  2. 2

    Slide the rods with the balls on the ends through the outermost eyelets of the clips. Pass the point through the eyelet, running diagonally towards the centre of the helicopter body.

  3. 3

    Press the installed rod into the four-connector centre plate piece. Position the centre plate piece beneath the centre of the helicopter body so that all four rods meet. The rods should make a slight clicking sound when pressed into the connector in the centrepiece, indicating that you have secured them in place. The four rods should make an "X" beneath the helicopter body with the helicopter raised onto the four balls placed on the rod ends.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.