How to Remove Campagnolo Ergo Shifters

Written by justin wash
  • Share
  • Tweet
  • Share
  • Email

Campagnolo Ergopower shifters are known for their durability, shifting accuracy and ease of maintenance, and they are preferred by many professional cyclists over Shimano and SRAM shifters. Campagnolo is also known for its exceptional customer service and warranty program, so when something does go wrong, the company will often replace the shifters. Make the replacement process go smoothly and easily by removing your own shifters to be warrantied.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • 4mm hex wrench
  • Cable cutters

Show MoreHide

Instructions

  1. 1

    Remove the bar tape from both sides of your handlebars. The Ergo shifters will not come off with the bar tape in place. Also remove any bar ends of plugs that may get in the way.

  2. 2

    Loosen the cable stop bolt on the front derailer, front brake, rear derailer and rear brake. Remove any cable ends using cable cutters so that the cables may slide through the housing.

  3. 3

    Peel back the rubber "hoods" that cover the shifters. Locate on the outside of each shifter the handlebar clamp bolt. Loosen the bolts with a 4mm hex wrench.

  4. 4

    Lightly slide the shifters toward the bottom of the handlebars. Any cables attached to the shifters will slide out of the housing as you remove the shifters.

  5. 5

    Wind the loose cables into a ring or tie them together to keep them out of the way.

Tips and warnings

  • It is easiest to remove the cables from derailers after you have been shifted them down to the lowest gear.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.