How to Speed Drying Time for Model Magic
Model Magic is a brand of air-dry clay made by Crayola. This soft, lightweight and nontoxic modelling material can be painted or coloured with water-based clay or magic markers once dry. The product air dries in 24 hours, though full drying of thick sculptures may take up to three days.
If you wish to speed drying time, you must help the water evaporate from the clay faster.
Use as thin a layer of Model Magic as possible to make your sculpture. The thicker the clay, the longer it will take for all of the air to evaporate.
Set the Model Magic sculpture in a warm, dry place, and point a regular household fan at it. Turn the fan on low, and rotate the sculpture every hour until it is completely dry.
- Model Magic is a brand of air-dry clay made by Crayola.
- Use as thin a layer of Model Magic as possible to make your sculpture.
Use a hair dryer on low heat to speed the drying time of your Model Magic sculpture. Hold your work in one hand, and hold the hair dryer 1ft. away from the sculpture. Move the hair dryer back and forth, and rotate the sculpture frequently until dry.
Leave your Model Magic sculpture outdoors in full sunlight to help it dry faster. Check it frequently to make sure it does not become too dry and begin to crack.
Set a conventional oven to 79.4 degrees Celsius, and allow it to preheat. Place your Model Magic sculpture on a baking tray, and set it inside the oven. Leave the door propped open slightly to vent excess moisture. Check the sculpture every 5 minutes to make sure it not becoming crumbly.
- Use a hair dryer on low heat to speed the drying time of your Model Magic sculpture.
- Check the sculpture every 5 minutes to make sure it not becoming crumbly.
- Model Magic is sold in large buckets and small foil packets.
Ann Jones has been writing since 1998. Her short stories have been published in several anthologies. Her journalistic work can be found in major magazines and newspapers. She has a Master of Fine Arts in creative writing.