Carburetor Vacuum Tools

Written by jennifer lyons
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Carburetor Vacuum Tools
Most current engines are using fuel injection instead of carburettors. (engine image by peter Hires Images from

The carburettor mixes air and fuel for the engine inside a car or motorcycle. The two types of carburettors are vacuum operated and fixed venturi. In vacuum operated carburettors, the opening which the fuel passes through is regulated by a vacuum operated piston. The piston is connected to a needle that slides inside the fuel jet.

Carburettor Synchronizer, Digital Vacuum Test

The Carburetor Synchronizer, Digital Vacuum Test is a digitally displayed synchroniser for balancing carburettors. It has a LCD screen that allows you to synchronise carburettors to the highest level of accuracy.

Pop-off Gauge

A pop- off gauge is used to calibrate carburettors pop-off pressure. It can read 1/2 psi increments up to 30 psi pressure.

Carburettor Leak Detector

A carburettor leak detector is used to check the needle and seat pressure with a gauge. You can also use it to check impulse diaphragms.

Motion Pro Carb Adjusting Tool

The Motion Pro Carb Adjusting Tool is designed to adjust Mikuni and Keihin vacuum operated carburettors and multiple units. It is 11 inches long and made of alloy steel.

FCR Carb Tool

The FCR Carb Tool is designed longer than a normal carb tool to reach into recessed cavities to adjust Keihin carburettors. It includes a long reach straight slot for pilot jets, a 6 millimetre hex for main jets and a 3 millimetre Allen wrench for removing float bowls.

Carburettor Vacuum Synchronizer

A carburettor vacuum synchroniser is used to balance out carburettors. Mechanics and technicians can visually see the balance for a high level of accuracy. The synchroniser can be used on multiple carburettors.

Mini-T Carburetor Tool

A mini-T carburettor tool is a hand tool designed for quick jet changes. It includes a No. 2 Phillips bit, a No. 1 straight slot bit and a 6 millimetre hex socket.

Air Blow Gun

An air blow gun blows dirt and dust using a hose and air inlet. You can use the rubber tip to clean out your carburettor jet.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.