Everyone knows that electricity and water don't mix, which is the main reason you should cover your outdoor electrical box. Leaving your outdoor electrical box unprotected can cause major electrical damage to your home. Any moisture that enters the box can short-circuit your box, causing a costly repair. Prevention is the best method, and installation is an easy process. Outdoor electrical box covers are available at your local hardware store.
- Skill level:
- Moderately Easy
Other People Are Reading
Things you need
- Tape measure
- Outdoor electrical box cover
- Power drill
- Carbide drill bit
- Drill bit
- Screw tip
- Silicone caulk
Measure the length, width and height of your electrical box using a tape measure.
Purchase an outdoor electrical box cover from your local hardware store. The dimensions of the cover should be larger than the dimensions of your electrical box.
Place the cover over the electrical box. Insert a marker into the centre of the attachment holes. Mark the placement of the holes on the wall. Most covers come with pre-drilled holes for screws to attach the box to the wall.
Remove the cover and drill pilot holes through the marks on the wall, using a power drill. Use a carbide drill bit for concrete, brick, aluminium siding and tile walls. Use a regular drill bit for wood walls.
Replace the drill bit with a screw tip. Place the cover over the electrical box and match the attachment holes with the pilot holes. Insert screws through the attachment holes and drill the screws into the wall with a power drill.
Squeeze a layer of silicone caulk around the edges of the cover. Silicone caulk is water-resistant. Let the silicone caulk dry for one day. Your outdoor electrical box is now covered.
Tips and warnings
- Silicone caulk is available at your local hardware store.
- Wear protective mask, goggles and gloves when handling a power drill.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for