How to Charge the Vectron Wave

Written by matthew cote
  • Share
  • Tweet
  • Share
  • Email

Air Hogs manufacture popular radio-controlled (RC) aircraft using durable materials and simplistic controls intended for all skill sets.The Vectron Wave is a flying saucer with a single fan for propulsion. The transmitter doubles as a charger, since the aircraft has a built-in lithium ion battery for flight times of around 10 minutes. Learn how to charge your Vectron Wave to ensure proper functionality and great performance.

Skill level:
Moderately Easy

Other People Are Reading


  1. 1

    Open the battery wire compartment; it is located at the top of the transmitter's front face. It opens like a door; the bottom of the doorway has a latch. Pry open the latch with your fingers to release the door.

  2. 2

    Pull out the charger cable, then turn the transmitter to charge mode by sliding the power switch to charge (which appears as "CHG" on the transmitter).

  3. 3

    Plug the charger cable into the charge port on the Vectron Wave; it is located on the top-centre of the aircraft. The transmitter's status LED should blink red, indicating it has entered charge mode.

  4. 4

    Wait 30 minutes for the Vectron Wave to fully charge. The transmitter's LED will illuminate orange when charging is completed.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.