How to test a 240v outlet

Written by brandy alexander
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to test a 240v outlet
This is a common multimeter used for testing electrical circuits. (Polka Dot Images/Polka Dot/Getty Images)

Power outlets in North American homes generally supply 110 volts, but some provide 220~240 volts. The plug for your electric oven and clothing dryer may look different from your average electrical socket, that is because they supply more voltage than the regular socket, 220 volts. Plugging in an appliance that does not match the outlet could damage both the outlet and appliance. Testing the voltage of an unknown socket is important to avoid damage and injury.

Skill level:
Moderate

Other People Are Reading

Instructions

  1. 1

    Turn the dial or select the button on the multimeter so that the meter measures voltage in an A/C circuit. This selection should be labelled with a V with a wavy sine wave over the letter.

  2. 2

    Insert the metal tip of the test lead at the end of the black wire into one of the two terminals in the 240V socket.

  3. 3

    Insert the other metal tip of the test lead at the end of the red wire into the other remaining socket in the power outlet.

  4. 4

    Read the display screen to determine the voltage present. If it reads between 215 to 245 volts, the outlet works properly and powers appliances with this voltage range.

Tips and warnings

  • Make sure power is turned on to the switch, if there is no power, you will not get a reading.
  • Be careful not to touch the metal leads from the meter to each other while inserting them into the power socket.
  • Test the meter on a known voltage source before testing an unknown outlet to ensure the meter is functioning properly.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.