How to Change the Speed on a Clarisonic

Written by john demerceau
  • Share
  • Tweet
  • Share
  • Email

The Clarisonic Sonic Skin Cleansing device is a rechargeable cordless electric skin brush that is used to remove make-up and deep clean facial skin. It is available to the general public in one, two and three speed models, known as the Mia, Classic and Plus respectively. In addition, a four speed Pro Sonic model is marketed to cosmetologists. The device is easy to use and its manufacturer offers a variety of replacement brush heads.

Skill level:
Easy

Other People Are Reading

Instructions

  1. 1

    Charge your Classic, Plus or Pro Sonic unit as needed by placing it in its charging cradle and plugging it into a wall outlet. Turn your charged unit on by pushing the on/off button. It will begin operating at low speed, which is the default setting.

  2. 2

    Hold the power button of the Classic two-speed unit down for three seconds while it is operating. Release the button when you hear three ascending beeps and the yellow indicator light comes on. It is now operating on high speed.

  3. 3

    Press the separate speed button, located above the power button, on the Plus three-speed model while the unit is operating. You will hear three ascending beeps and the lower red indicator light will come on. This is the normal speed setting. Press and hold the speed button again and you will hear five ascending beeps as you see the upper red light come on. This is the high speed setting.

  4. 4

    Press the separate speed button, located above the power button, on the Pro four-speed model while the unit is operating. The first press will cause three ascending beeps to sound and the lower red indicator light to come on. This is the normal speed setting. Press it again. Four beeps will sound and the upper light will come on. This is the high speed setting. Press it a third time for the Pro speed setting. This is indicated by five ascending beeps and both indicator lamps coming on.

  5. 5

    To return to low speed, hold the power button of the Classic unit again for three seconds. Three descending beeps signify low speed and the yellow light will turn off.

  6. 6

    Press the speed button on the Plus and Pro while it is on the highest speed and the speed will return to the low setting. All the indicator lights will go out.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.