How to seal a plywood floor

Written by kelly sundstrom
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to seal a plywood floor
Seal a plywood floor with paint rollers. (Hemera Technologies/AbleStock.com/Getty Images)

Using plywood flooring can save you time and money, especially if your dwelling will be used short term, such as a hunting cabin. One way to preserve plywood flooring is to coat it with layers of clear sealant, which will prevent the plywood from becoming damaged by moisture or wear. Sealant can be painted over a plywood floor using tools that are readily available at any hardware store, such as paint rollers.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Orbital sander
  • Shop vacuum
  • Sealant
  • Paint tray
  • Paint roller with a long handle

Show MoreHide

Instructions

  1. 1

    Run an orbital sander over the entire plywood floor to remove any roughness or splintering.

  2. 2

    Remove sawdust using a shop vacuum.

  3. 3

    Fill a paint tray with enough clear sealant for the bottom to be 2 inches thick.

  4. 4

    Coat a long-handled paint roller into the sealant, then roll the sealant over the entire plywood flooring. Allow the sealant coating to dry for six hours.

  5. 5

    Repeat this process two more times, allowing the sealant to dry for six hours in between each coat.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.