The Thermador swamp cooler is a classic automotive air conditioning system. It is often referred to jokingly as a "missile launcher" because of its peculiar canister shape and unique mounting outside the car. In the 1950s, enterprising dealers rented out these coolers to motor cars driving across the Mojave Desert of California. Used Thermador coolers are available for purchase as of 2011, but the manufacturer's instructions are often difficult to find. Thankfully, the units are simple to install and operate.
- Skill level:
Other People Are Reading
Things you need
Roll the passenger window halfway down. Slip the lower edge of the support bracket in between the rubber window seal and the window. Place the inside edge of the cooler into the upper window channel. Roll up the window until the cooler is held firmly in position, but don't roll it up so tightly that you damage the window.
Remove the cover from the fill hole on top of the Thermador. Pour water from a pitcher into the hole until it is nearly full. Replace the cover.
Drive the vehicle (so that air will flow through the Thermador). Pull the string as needed to increase the cooling effect. Refill the water level as needed.
Tips and warnings
- Pulling the string causes a cylinder of swamp cooler material to rotate inside the Thermador, bringing wet material into contact with moving air. The string is spring-loaded, so it will recoil after pulling. When the swamp cooler material becomes dry, the air entering the car will be warm.
- The Thermador swamp cooler works best in dry climates. It will not work if the car is stationary.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for