How to Factory Reset a Logitech 1000

Written by david clair
  • Share
  • Tweet
  • Share
  • Email

The Logitech Harmony 1000 is a programmable universal remote control with a touch screen control panel. The remote control can be used to control a wide variety of electronic devices. Each device that is used with the unit must be programmed and calibrated to work properly. If an error occurs when calibrating a device, or if settings have been changed on the unit that are causing problems, it can be reset back to factory settings.

Skill level:

Other People Are Reading


  1. 1

    Turn the remote control over so its back is facing up. Slide the battery cover off of the battery compartment.

  2. 2

    Lift the battery out of the battery compartment.

  3. 3

    Press and hold the power button.

  4. 4

    Insert the battery into the compartment.

  5. 5

    Release the power button when the "safe mode" screen appears.

  6. 6

    Remove the battery from the battery compartment. Wait about five seconds.

  7. 7

    Replace the battery into the compartment. Replace the battery cover.

  8. 8

    Press the power button to turn the unit on. The unit is reset back to original factory settings.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.