How to Dismantle a 65-Inch Mitsubishi Projection TV

Written by david lipscomb Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Dismantle a 65-Inch Mitsubishi Projection TV
Dismantling a Mitsubishi 65-inch TV is necessary for many delivery scenarios. (home theatre with big flat television panel image by Pavel Losevsky from Fotolia.com)

Mitsubishi 65-inch rear-projection TVs are large. As a result, Mitsubishi engineers realised that getting these mammoth sets up and down steps and around corners would be at times impossible, unless the set could split in two. Mitsubishi wisely engineered its CRT rear-projection TVs to easily disassemble, though you'll need the help of one or two other people to manage the weight and unwieldy nature of the set's components. Once separated, 65-inch Mitsubishi TVs are far easier to deliver and install.

Skill level:
Easy

Other People Are Reading

Things you need

  • Two assistants
  • Philips screwdriver
  • Small flathead screwdriver

Show MoreHide

Instructions

  1. 1

    Pull the speaker grille off the front of the set, attached by a heavy-duty hook-and-loop fastener.

  2. 2

    Remove the four plastic screw caps in each side of the set, using the small flathead screwdriver. Unscrew the four screws on each side of the TV, using the Philips screwdriver.

  3. 3

    Locate the single wire harness on the front panel, directly under the screen and behind the speaker grille's installed location. Carefully pull on this plug to disconnect it from the cabinet.

  4. 4

    Have one assistant on each side of the TV lift it straight up, detaching the top of the chassis from the bottom.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.