How to Install Duct Wrap Insulation

Written by elizabeth knoll
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Install Duct Wrap Insulation
(BananaStock/BananaStock/Getty Images)

Duct wrap is an insulation material made of fibreglass. One side of the wrap has a foil vapour barrier that protects the insulation from damage. Since heating and cooling ducts are made of metal, they quickly conduct heat out of the duct when heating and into the duct when cooling. This creates significant inefficiencies in your system which will be reflected in your energy bill. Duct wrap also serves to prevent your ducts from sweating when you run your air conditioning.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Tape measure
  • Duct wrap
  • Utility knife
  • Foil tape
  • Dust mask

Show MoreHide

Instructions

  1. 1

    Measure each side of your duct work. Add these measurements together to come up with the perimeter. The perimeter in this case is the distance all the way around the duct work.

  2. 2

    Roll out your insulation on the floor or another flat surface. Measure out the distance you calculated in step 1. Add about 4 to 6 inches to this measurement. This allows for the thickness of the insulation and creates an overlap so you can tape your insulation down tightly.

  3. 3

    Cut through the insulation and foil layer with your utility knife. Use a sharp blade to prevent ripping or shredding of the insulation.

  4. 4

    Drape the duct wrap insulation blanket around the duct. Tape one end down to the duct with foil tape and pull the other end tightly. Notice that you will have a few inches of overlap in the insulation. Tape this end down tightly to the insulation.

  5. 5

    Measure and cut another piece of insulation. Secure this to the duct in the same fashion as you did the first piece of insulation. Tape the seam around the entire duct where the two pieces of insulation meet. Continue to cut and fasten insulation to the duct until it is completely wrapped.

Tips and warnings

  • Dust masks should always be worn when working with insulation. The fibreglass fibres are lung irritants.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.