How to Remove Large Tree Stumps

Written by sommer leigh | 13/05/2017
How to Remove Large Tree Stumps
Removing larger tree stumps can prove difficult by some methods. (stump image by Henryk Olszewski from

While digging out stumps by hand with an axe or shovel is a viable option in removing small tree stumps, larger tree stumps require more drastic measures. More expensive and labour-intensive, although still effective methods, include renting a stump grinder or backhoe. Two other alternate, inexpensive methods provide an easy, virtually labour-free way to remove large stumps.

Drill 1-inch holes with a 1-inch spade bit with a spade bit extension around the stump's perimeter. Drill to about 12 inches deep and 3 to 4 inches from the edge. Drill holes 3 to 4 inches down from the rim on the side of the stump at a 45-degree angles to help with venting.

Pour 85.1 to 113gr. of stump remover chemical granules into each hole and then fill the holes with water.

Wait four to six weeks for the stump to completely decompose.

Break apart the spongy, rotten wood with an axe and dispose of in an outdoor trash container.

Set scrap pieces of wood on top of the stump.

Light the pile with a lighter or match when you have a thick pile collected on top of the stump. Mix some brush, such as smaller sticks and weeds, into the wood pile to heat up the fire.

Place pieces of wood on top of the stump as needed to keep the fire burning. Allow the fire to burn until it burns through the stump.

Things you need

  • Drill
  • 1-inch spade bit with a spade bit extension
  • Stump remover chemical
  • Axe
  • Lighter or match
  • Wood
  • Small twigs or weeds

Show MoreHide

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.