How to design rafter roofs

Written by ed english
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to design rafter roofs
Roof rafter system design. (Copyright © 2009 English Explorers LLC)

A rafter roof system takes into account the size and shape of the building, roof pitch or slope and materials chosen. The design can be hand drawn or computer aided. Rafter roofs are made from many different materials and have various shapes and styles. Generally the larger and stronger the rafters, the farther apart they can be spaced. The geographic location of the building will also affect the design.

Other People Are Reading

Things you need

  • Pencil and paper
  • Drafter's ruler or scale
  • Drafting software and printer

Show MoreHide

Instructions

  1. 1

    Draw the layout of the building by showing the outside walls. Place dimensions on your drawings.

  2. 2

    Determine if you want a gable or a hip roof system. A gable roof will allow the end wall to extend all of the way up to the ridge of the roof. An extra vertical triangular section of wall will be used to fill the area. A hip roof has sloping ends and sides all around the building. The gable roof will allow more room in the attic area. Depending on the pitch or slope of the roof an extra room or storage area can be placed in the expanded attic area.

  3. 3

    Locate the valleys and ridge boards for each section of the roof. The ridges are usually located at the midpoint of two parallel outside walls. The valley rafters will have 45 degree angled cuts on each valley end of the rafters. Locate any dormers that will exist. Dormers will require ridges and valleys where they intersect the main roof. An asymmetrical roof will require a much more complicated rafter system.

  4. 4

    Determine the materials that will be used for the rafters and roof decking or covering. Wood of many shapes, sizes and types, steel, or even aluminium could be used. The type material used will determine the spacing of each rafter and the maximum lengths that can be used.

  5. 5

    Show side views of each separately pitched roof. Locate the birdsmouth cuts for each rafter based on the amount of overhang and soffit area desired and the distance from the ridge board. The birdsmouth cuts are horizontal and vertical cuts made at the location where the rafters rest on the outside wall. See illustration for details. An overhang that is too long will interfere with the windows and doors located in the walls.

    How to design rafter roofs
    Birdsmouth cut location.
  6. 6

    Determine the pitch of the roof by consulting local building codes. Areas that have more ice and snow will require steeper pitched roofs. Smaller buildings with shorter rafters can handle less pitch. The appearance of the finished building will need to be considered. The dimensions of overhang or soffit area are also a factor. The same pitch may not be used for the entire roof. A split-pitch roof can have one pitch for the front side of a common roof and a different pitch for the back.

Tips and warnings

  • Consult local planning department for acceptable building materials and practices used in your county.

Don't Miss

Resources

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.