How to Make a Weather Station Model

Written by don shepard
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make a Weather Station Model
Sky is ¼ covered with clouds or "a few" clouds

Constructing a weather station model can be a satisfying experience, similar to learning a secret language. Weather enthusiasts see these station models on both surface- and upper-level weather maps. Serving the purpose of accommodating space for all pertinent information from a multitude of weather stations onto a map, the station model is an essential tool. Familiarity with these weather maps and a cursory knowledge of weather will have you reading and assembling weather station models in no time.

Skill level:

Things you need

  • Drawing tool
  • Access to weather data
  • Weather station model current weather symbol guide

Show MoreHide


  1. 1

    Draw a circle. Look at the sky and divide it into eighths. Fill in the circle based on how many eighths of the sky are covered with clouds. A clear circle represents a station with no clouds observed; a full circle is an overcast sky over the weather station.

    How to Make a Weather Station Model
    Sky is ¼ covered with clouds or "a few" clouds
  2. 2

    Connect a line to the circle extending toward the direction the wind is coming from. Draw a long line connecting and perpendicular to the tip of the first line to represent a 10-knot wind speed. Draw a shorter line for 5 knots and a flag for 50 knots.

    How to Make a Weather Station Model
    Overcast sky with northwest 65-knot average 1-minute wind speed
  3. 3

    Determine the temperature and dew point of your weather station. Record the temperature in degrees Fahrenheit just to the left of the wind barbs. Record the dew point under the temperature, just beneath the circle and to its right.

  4. 4

    Plot the symbol for current weather just to the left of the station model circle. Place the visibility in miles to the left of the current weather symbol.

    How to Make a Weather Station Model
    Continuous, slight rain at time of observation
  5. 5

    Record sea level pressure to the nearest tenth of a millibar in the upper right of the station model circle. Place only the last three digits of this number on your weather station model.

  6. 6

    Place the pressure change to the nearest tenth just below your current sea level pressure record. Signify a pressure increase with a plus sign and a decrease with a negative sign.

    How to Make a Weather Station Model
    Sea level pressue 1010.1 millibars decrease of 1.1 millibar---finished weather station model

Tips and warnings

  • The National Weather Service uses 7 miles as the maximum visibility.
  • Have reference points at your weather station to assist with visibility.
  • Note that the average sea level pressure is between about 930 and 1050 millibars; thus, a recording of 298 is assumed to be 1029.8, as opposed to 929.8, unless there is an abnormal event such as a hurricane near the weather station.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.