How can I make my slate tile look wet?

grey slate image by Barcabloo from

Slate tiles have a multicoloured variegation that is beautiful and unique to each lot of stone. Even a single colour of slate tile will vary from piece to piece in shade and tone. Wetting these tiles down enhances this colour, deepening it and bringing out additional, hidden shades of colour within each tile. To achieve this look long term, use sealers.

Characteristics of Slate Tiles

Slate is a metamorphic stone, comprised of shale which has undergone tremendous pressure and force to create a dense, hard material. Since shale was created in multiple layers of sediment, slate will often split or cleft along these layers as well, making the material ideal for forming into tiles. Like all natural stone, slate is porous, meaning that its surface is covered in thousands of tiny holes invisible to the naked eye. These holes allow the material to absorb moisture. When wet, slate tiles will deepen and darken in colour. This can give the tiles a richer appearance, also helping to alleviate some of the chalky consistency that slate will sometimes have due to its cleft and layered nature.

Sealing and Enhancing Slate Tiles

All slate tiles should be sealed during installation with an impregnating sealer to help protect the stone and help make clean up of grout easier. A second, topical sealer can also be applied to the stone after it has been grouted to enhance and deepen the colour.

There are two types of enhancing sealers. Matt finish sealers will deepen and enhance the colour of the stone, but will leave the stone with a flat, matt look. This is ideal if you like the deep colour of the slate when wet, but don't necessarily like the shiny, wet look.

Shine enhancing sealers will deepen and enhance the colour of the stone like the matt finish enhancers, but will also leave behind a glossy finish. This glossy finish should be carefully applied to natural cleft slate tiles, since it can pool and build up in some areas, creating a varnished look. If applied carefully, to give just a thin layer of topical sealer to the entire stone, the tiles will appear to be wet even after the sealer has completely dried.

Both types of topical sealer should be reapplied on an ongoing basis to help protect the stone and keep its deep colour. Well sealed tiles should bead water up off of their surface when they get wet; when the water stops beading up, it is time to reseal the stone.

Most recent