We Value Your Privacy

We and our partners use technology such as cookies on our site to personalise content and ads, provide social media features, and analyse our traffic. Click below to consent to the use of this technology across the web. You can change your mind and change your consent choices at anytime by returning to this site.

Update Consent
Loading ...

Causes of gold discoloration

Updated February 21, 2017

The most likely reasons for gold discolouration are metallic abrasion, low-quality plating and corrosion. Hard metals from other jewellery or cosmetics can turn the colour of gold; the plating itself can discolour, especially to yellow, since many plates are made with rhodium rather than palladium, which is more resistant to discolouration. Finally, though gold itself never corrodes, the other alloys mixed with gold, particularly silver, do, and this dulling can appear as a discolouration of the gold itself.

Loading ...

Metallic Abrasion

The make-up or cosmetics you wear can cause discolouration in gold jewellery. Many cosmetics have hard metals that can cut the softer gold. You'll know you're wearing a cosmetic that has metals harder than gold because a dark smudge will appear where the jewellery is near the cosmetic application on the skin. The smudge appears because the hard metal in the cosmetic has been separated out by contact with gold, creating a dark, powdery substance that skin absorbs. To fix the problem, switch cosmetics or apply your make-up without the jewellery. Then wash the area of the skin where the jewellery goes.

Low-Quality Plating

Most gold rings are sold with a rhodium plated surface, according to David Vinson of Metal Arts Specialties. These plates are about .25 to .5 microns thick, sometimes thinner. In comparison, a human hair is 100 to 125 microns. Though rhodium is very hard, reflective and pretty, it's also porous. Thus, over time, particles can sift between the rhodium plating and affect the gold alloy or simple get lodged in the plate itself, causing discolouration. Re-plate the gold jewellery in rhodium again and you'll face the problem again, year after year. Instead, have a jeweller plate the ring in a layer of platinum and then in rhodium. It will cost about £65, but you won't have to do it again for five to seven years, depending on how regularly you wear the jewellery.


"Hairspray, perfume, perspiration, smog and other chemicals can also cause discolouration," according to Mrs. Gottrocks Fine Jewelry and Gifts. Though gold itself doesn't corrode, the metals it's mixed with to form an alloy do. Silver, copper and nickel are all common metals mixed with gold. When these metals oxidise, they look very dark. Warmth, perspiration and other moisture all precipitate the discolouration in these alloys. In fact, "sometimes the actual design of the jewellery can be an influencing factor. Wide shanks (the underside portion of the ring) have more surface area to contact abrasives or corrosives," according to Mrs. Gottrocks. The best remedy is the most expensive: have a non-porous plate material, such as platinum, protecting the gold. General care will help with the discolouration, however. Take off the ring when you wash and use absorbent powders--one's without hard metals--on the area of skin where you wear jewellery to diminish moisture contact with the jewellery.

Loading ...

About the Author

Matt Scheer began writing professionally in 2005. His work has appeared in "The Daily Texan" and "The New York Tribune." Scheer holds a B.A. in English and a B.A. in history, both from the University of Texas. He is also a certified Yoga teacher and Web designer.

Loading ...