# How to Calculate the Amount of Fill for a Trench

Jupiterimages/Photos.com/Getty Images

Trench filling should be an easy task, but when you are paying for the filling material, such as gravel or concrete, you need to be as accurate as possible. By buying neither too much nor too little, you get the best deal and complete the task without delays.

If all trenches were perfectly smooth and regular, the task would be easy, but trenches vary in depth, width and length. Calculating the correct quantity of infill for a trench is still possible, however, by following a straightforward measuring process.

Measure the length of the trench. Lay a tape measure along the ground adjacent to the trench or along the base of the trench if that is flatter. Record the length. Repeat the measurement and if it differs from the first result, continue to repeat the measurement until two results match. Leave the tape measure lying beside the trench.

- Trench filling should be an easy task, but when you are paying for the filling material, such as gravel or concrete, you need to be as accurate as possible.

Measure the width and depth of the trench at equally spaced intervals along its length. Refer to the tape lying beside the trench to establish the distance between measurements. For example, in a 12-foot-long trench, you may choose to record the dimensions every 3 feet, at the 3, 6, 9 and 12 feet markings along the tape. Record each measurement as you make it.

Calculate the average width by adding the individual measurements together and dividing the total by the number of measurements taken. For example with measurements of 2.0, 2.5, 2.0, 3.0 and 2.0 feet, the average would by (2.0+2.5+2.0+3.0+2.0) / 5, or 2.3 feet. Establish the average depth using the same process.

- Measure the width and depth of the trench at equally spaced intervals along its length.
- For example, in a 12-foot-long trench, you may choose to record the dimensions every 3 feet, at the 3, 6, 9 and 12 feet markings along the tape.

Determine the volume of the trench by using the formula: Volume = Width x Length x Depth. As an example, a trench 12 feet long with an average width of 2.3 feet and an average depth of 5 feet has a volume of (12 x 2.3 x 5) cubic feet.

Convert the volume in cubic feet to cubic yards. Soil, concrete and other fill materials are usually sold by the cubic yard. There are 27 cubic feet in 1 cubic yard, so divide the value in cubic feet by 27 to convert to cubic yards.

References

- Building Green: A Complete How-To Guide to Alternative Building Methods; Clarke Snell and Tim Callahan; 2005
- College of Saint Benedict and Saint John's University: Descriptive Statistics
- Pennsylvania State University: Area and Volume Formulas

Tips

- Accuracy increases as the number of measurements increases so record the width and depth as often as is practical, paying particular attention to irregular sections of the trench.
- Take every measurement twice to help eliminate errors.
- Record measurements as you take them. Do not rely on your memory.

Warnings

- Do not enter deep or unstable trenches without the appropriate safety measures in place.

Writer Bio

David Robinson has written professionally since 2000. He is a Fellow of the Royal Geographical Society and the Royal Meteorological Society. He has written for the "Telegraph" and "Guardian" newspapers in the U.K., government publications, websites, magazines and school textbooks. He holds an honors Bachelor of Arts in geography and education and a teaching certificate from Durham University, England.