How to replace a halogen bulb r7s
Halogen bulbs illuminate better than fluorescent bulbs and burn for a longer time while saving up to 20 per cent in energy. The R7s halogen bulb is used in outdoor floodlights, up lights and display lamps for landscaping.
This model of bulb has a round cylinder in the middle with two metal ends or connectors that make contact with the bulb holder's negative and positive wires to illuminate the bulb. They are relatively easy to replace.
Let the light bulb cool for about 15 minutes if it was just illuminated.
Put on the gloves. Place a ladder near the light fixture if needed to reach the fixture.
- Halogen bulbs illuminate better than fluorescent bulbs and burn for a longer time while saving up to 20 per cent in energy.
- Let the light bulb cool for about 15 minutes if it was just illuminated.
Unscrew any screws holding the light fixture closed and remove them. Swing the door to the light fixture open.
Remove the old bulb and insert a new halogen bulb into the holder, pressing both metallic ends into the metallic contacts on each end of the holder.
Close the fixture door, replace the screws and tighten them.
- Never touch a halogen bulb with your bare hands. The oils in your skin react with the quartz coating on the bulb and greatly shorten the life of the new bulb.
Mary Lougee has been writing for over 10 years. She holds a Bachelor's Degree with a major in Management and a double minor in accounting and computer science. She loves writing about careers for busy families as well as family oriented planning, meals and activities for all ages.