How Do I Identify Old Ceiling Insulation?

Written by dorian gray | 13/05/2017

When preparing for renovations of older homes, you will likely encounter old insulation. Depending on the type, it could be dangerous to your health, damaged or simply too old to be as effective as modern insulation. Learn how to identify old ceiling insulation.

Insulation Types

First, you should understand the different types of insulation. There are five main types of insulation that you may encounter. Loose-fill insulation consists of natural or man-made fibres that are blown into the ceiling cavity. Batt or blanket insulation is made from glass or cotton fibre and comes in roll form, usually in widths of 16 or 24 inches. Rigid insulation is extruded into board form and is often made of plastic. Foam insulation is sprayed into place and expands to fill the cavity. Radiant barriers, which are usually installed in the attic, have aluminium foil backing to prevent heat from radiating through.

Identifying Old Insulation

Some of the insulation types discussed above are the result of new technology. Older types of insulation include loose-fill or batt fibreglass, which can be pink, yellow or white. While this type is often still used, older insulation may be discoloured or torn and is therefore less effective. If the insulation is wool-like and grey, it may be loose-fill rockwool. If it is white, however, it may be a newer product. Shredded newspaper, or loose-fill cellulose, was another common insulation in the past. Vermiculite and Perlite are older granulated insulations with relatively low R-values, which describes the product's thermal resistance. Sometimes, wood products such as sawdust or balsa wood were used at insulation in old homes, but these are very ineffective.

While it may be acceptable to leave some older insulation types in place, replacing it with new insulation with a higher R-value will result in energy savings.

Dangerous Old Insulation

Two types of old insulation that are dangerous to your health are urea formaldehyde foam, which is usually grey or yellow and brittle, and asbestos. Formaldehyde off-gasing is a concern, so this product is no longer on the market. Most people are aware of the dangers of asbestos, which may cause cancer and other health problems. If you suspect your home contains asbestos insulation, you should not remove it yourself. Instead, hire an asbestos abatement contractor to safely remove this insulation before proceeding with any renovations.

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.