Etching Glass: Detailer's Grip

Video Transcript

"Etching glass: Detailer's Grip. Dremel high speed rotary tools offer a variety of options for etching designs in the glass. For this craft project we're using a Dremel 4000 tool which when paired with the Detailer's Grip attachment model A577, provides users precise fingertip control for detailed work. We're also using a Diamond Point bit number 7103 with a 3/30" into collet number 481. Other etching bits like Tungsten carbide cutters or silicone carbide stones maybe use depending on the depth or the width of the etch styling you're looking for. This project can be completed using any Dremel variable or two speed rotary tool that works with all attachments. After you've selected and traced your pattern, connect the Detailer's Grip attachment and set your tool to a speed between 15,000 and 25,000 RPM. You're ready to begin etching. Etching glass requires some practice. We recommend you experiment on less expensive glass objects first. With Detailer's Grip shown here, you can achieve a great level of detail for added effects and intricate designs. After the pattern is complete, wipe the area clean with a cloth and you're done. Here's some more thoughts on etching glass. Smaller bits and cutters require the use of smaller collets. Make sure to use the correct collet for the accessory you choose. Don't try to drill a hole in glass using etching accessories. These accessories are not designed for that application. Tungsten carbide bits can be costly. We suggest you practice etching first with silicone carbide stones to become familiar with the process before advancing to Tungsten carbide. Diamond Points provide a very fine line. Tungsten carbide cutters provide a sharper, more aggressive line. Silicone carbide stones provide a fuller, but softer line and they're great for smoothing rough edges. In combination, the different bits can be used to create the right look for any piece."