DISCOVER
×

Video transcription

in this video clip we will be installing a bathtub spout. Now if you have a screw on tight bathtub spout what your going to want to do is slip it onto your pipe as far as it goes and then your going to want to start wanting to rotate clockwise remember righty tighty lefty lucy and you'll rotate clockwise until it tightens down. Now if you happen to have the push on type a bathtub spout what your going to want to do is make sure your set screw in the bottom is loose go ahead and push that on want to wiggle that a little bit, then when you have it good and straight what you want to do is come down here and tightened up that set screw so its not going wiggle on you, it's not going to rotate on you.