Learn about all the parts of a quad or ATV 4-wheeler and the functions from our quad riding expert in this free how to video on ATV and quad riding.
Today we're going to be talking about basic quadding. First of all, let?s go a head and get to know our bike over here. First we're going to start with out hand controls. This right here, is our right hand, we're going to have our gas. This is our gas right here. Two wheel drive and four wheel drive, our front break, and then we'll switch to our left side. Over here, we have our horn. We have our kill switch, our starter, our choke. We have our beams off; low beams, high beams and right here we have our breaks for front and rear. Right here we have our gas, this is where we put it in, this is where we read how much we have left. Right now we're on full. This is our key, this starts and turns on our engine. This is our neutral night, lets us know when we're in neutral, reverse, and park. This is our oil light and this is our four wheel drive light. Right here we have our control. This controls and puts it into park, reverse, neutral, high gear, and low gear. Up here we have our gas, you can turn it on to the on position, the reserve take in case you run low, and then you can turn it off. This is your foot break this controls your rear break and allows you to put your controls into for reverse, neutral, and drive.