Mount Rushmore, located in South Dakota, is one of the best-known monuments in the United States. Featuring the faces of four great presidents -- George Washington, Thomas Jefferson, Theodore Roosevelt and Abraham Lincoln -- the monument was sculpted by Gutzon Borglum between 1927 and 1941. The key to building a Mount Rushmore model is re-creating the presidents' faces.

  • Mount Rushmore, located in South Dakota, is one of the best-known monuments in the United States.
  • The key to building a Mount Rushmore model is re-creating the presidents' faces.

Mix the plaster with water, following the instructions on the plaster container.

Pour plaster into 6-by-4-inch face moulds. You can find face moulds at craft stores and online hobby stores. Make four plaster faces.

Differentiate the faces by adding pieces of Sculpey, a kind of oven-bake clay. Using a reference photo as a guide, add hair or other details to the presidents' faces. Washington and Roosevelt require the least amount of change, but Lincoln requires curly hair and Jefferson sports long hair. Use clay to build-up Lincoln's cheeks and eyebrows, which are prominent. Give Roosevelt a large moustache and don't forget Lincoln's beard.

  • Differentiate the faces by adding pieces of Sculpey, a kind of oven-bake clay.
  • Using a reference photo as a guide, add hair or other details to the presidents' faces.

Bake the faces to harden the Sculpey parts. Follow instructions on the package.

Staple chicken wire to the plywood baseboard. Begin to mould the wire into the shape of the Mount Rushmore slope, using your photo reference as a guide. Leave flat areas for the faces to be inserted. Washington and Jefferson should be about a forehead higher than Roosevelt and Lincoln.

Mix more plaster in a bowl. Dip newspaper strips in the plaster and place them on the chicken wire to build Mount Rushmore's slopes. Carefully build up a small lip around the edges of each face to hold them in place. Allow the plaster strips to dry.

  • Staple chicken wire to the plywood baseboard.
  • Carefully build up a small lip around the edges of each face to hold them in place.

Spray paint your model with a light tan base. Apply two to three light coats until you can no longer see the newsprint. Lightly spray on coats of other earth-tone colours without completely covering the previous coats. Follow the terrain with each pass of the spray can, to create a realistic soil effect.

WARNING

Work in a well-ventilated area when using spray paints.