Chevy aveo head torque specs

Written by darienc
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Chevy aveo head torque specs
(Thinkstock Images/Comstock/Getty Images)

Chevrolet introduced the fuel-efficient subcompact Aveo in 2004. According to Edmunds, "Chevy Aveo is representative of a new generation of inexpensive small cars that sacrifice little in terms of features or comfort, especially in light of what similar offerings used to be like in earlier decades." The Korean auto manufacturer Daewoo, a subsidiary of General Motors, manufactures the Aveo.

Other People Are Reading

The 2010 Chevy Aveo Engine

Chevy continues to use the same 1.6-litre, in-line, four-cylinder engine that appeared in the 2004 Aveo, though the horsepower has increased from 103 to 108 over the years. It is always best to check the torque specs for a specific model year of a vehicle, rather than simply the model as a whole, as the torque specs for the cylinder head can change from year to year even if the engine remains basically the same. The cylinder head torque specs are the same for all trims of the 2010 Chevrolet Aveo. The cylinder head is attached with ten bolts which are sequenced in two rows of five. When referring to the cylinder head torque specs, the first row is sequenced 9-5-1-3-7, and the second row is sequenced 10-6-2-4-8, with bolts 9 and 10 closest to the front of the engine, and bolts 1 and 2 opposite one another.

Bolt Torque Specs

The bolts for the cylinder head on the 2010 Chevy Aveo should be tightened in five separate steps. For the first step, each bolt should be tightened in sequence from 1 to 10 with 18 foot-pounds of torque. The next four steps in tightening the cylinder head bolts on the 2010 Chevrolet Aveo are based on the degrees the bolt is turned rather than the torque applied to the bolt.

Tightening Sequence - Next Steps

Following the same 1 to 10 sequence, tighten each bolt 60 degrees, then repeat the process two additional times, for a total of three 60-degree turns on each bolt.

Final Tightening Sequence

For the fifth step in tightening the cylinder head bolts of the 2010 Chevy Aveo, tighten each bolt an additional ten degrees, following the same 1 to 10 sequence as before.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.