Exhaust pipe flaring tools

Written by jennifer lyons
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Exhaust pipe flaring tools
Failed exhaust pipes are a common repair job. (exhaust pipe image by A74.FR Ben Fontaine from Fotolia.com)

Pipe flaring tools are a necessity to help you replace or repair an exhaust pipe. Most inexpensive exhaust pipe flaring tools are able to round out the end of the pipe, but a high-end tool will move the metal to make the opening larger. To make the change more dramatic, you can heat the pipe before flaring to make the metal more pliable.

Other People Are Reading

Superior Tool Pro Pipe Flaring Tool

The Superior Tool Pro Pipe Flaring Tool is used to flare brass, soft copper and aluminium tubing in all standard sizes ranging from 3/16 to 5/8 inches. It has a self-centring yoke inclined at 45 degrees that is made of resilient, malleable steel

Lisle Flaring Tool Set

The Lisle Flaring Tool Set includes strut and tailpipe cut-off tools that can cut both round and out-of-round pipes. You can use one hand to operate the four knife-edged wheel. A specialised design lets this tool shift so that it can make out-of-round cuts as well as cut an entire pipe with a one-third turn.

Great Neck Saw Pipe Flaring Tool

The Great Neck Saw Pipe Flaring Tool can produce a single flare on tubing with no possibility of crushing. It can make a smooth flare on all standard high pressure fittings, including sizes 3/16 to 5/8 inches.

Bend Pak Blue Bullet Heavy Duty Pipe Bender

The Bend Pak Blue Bullet Heavy Duty Pipe Bender is a solid steel, electric machine that can be used for all necessary flaring and expanding with a maximum capacity of 3 inches. It also features a degree plate for easy viewing, an internal expander and a high speed clamp-less swager.

RIDGID Model 345 Flaring Tool 45 Degrees

The RIDGID Model 345 Flaring Tool 45 Degrees can flare brass, aluminium, soft copper and mild steel tubing in seven sizes ranging from 3/16 to 5/8 inches. Its centre yoke is inclined to a 45 degree angle.

Superior Tool Company Papco Style Flaring Tool

The Superior Tool Company Papco Style Flaring Tool is a small, hand-held tool that can produce 45 degree flares on aluminium, copper, brass, and thin wall tubing in sizes ranging form 3/16 to 5/8 inches.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.