Campagnolo Bearing Tools

Written by heather nancing
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Campagnolo Bearing Tools
The Park CBP-3 Campagnolo Bearing Puller and Installation Set allows avid bikers to remove and install pressed bearings at home. (bmx, pièces détachées image by Claudio Calcagno from

Bicycle enthusiasts can keep their cranks running smoothly by replacing the bearings on a regular basis. The job is one that can be done at home with the right equipment. Although there are many bearing remover tools and installation kits on the market, the Park CBP-3 is the only one currently designed specifically for Campagnolo bearings. It is a must-have for this job. The device is listed below, along with other handy tools for the operation.

Other People Are Reading

Park CBP-3 Campagnolo Bearing Puller and Installation Set

This complete bearing tool set allows you to remove or install or the pressed bearing used on both Campagnolo and Fulcrum Ultra-Torque cranks. The device's bearing puller has forged arms and tapered edges to pinch under the bearing while a thick plunger system pulls it. According to the PBK website, the installation tool "precisely fits" both the crank spindle and the press fit bearing to assure its proper installation. The bearing can then be tapped into place using a hammer.

Small, flat-tipped screwdriver

A small, flat-tipped screwdriver will come in handy when removing the C-clip above the bearing, which is necessary to do before installation.

Snap ring pliers

If a properly-sized flat-tipped screwdriver is not available, snap ring pliers will also do the trick to remove the C-clip. According to an article at Park Tool's website, use the pliers to catch the edge of the clip and pry it free.


You will also need a hammer or other light pounding tool to tap the bearing into place once it is on.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.