Mercruiser 7.4 liter mpi specifications

Written by paul mccormick
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Mercruiser 7.4 liter mpi specifications
(Zubin Shroff/Digital Vision/Getty Images)

The MerCruiser 7.4-litre MPI (7.4L MPI), is an boat engine manufactured by Mercury Marine, a American company headquartered in Fond du Lac, Wisconsin. The 7.4L MPI is an inboard motor which, when attached to a sterndrive unit, propels the vessel through the water.

Other People Are Reading

Performance Specs

The MerCruiser 7.4L MPI is a gasoline powered, fuel injected, 8-cylinder, 4-cycle marine engine. It delivers 310 horsepower (HP) to the propeller shaft at a maximum of 4,200 to 4,600 RPM at WOT (revolutions per minute at wide open throttle). It is a large engine with 454 cubic inches (7.4 litres) of displacement.

Electrical Specs

The 7.4L MPI comes standard with a 72-amp alternator that charges the 12-volt, negative ground electrical system. The recommended battery rating is a minimum of 650 CCA (cold cranking amps) with 150 Ah (amps per hour).

Other Specs

For purposes of a tune up, the correct timing setting is 8 degrees BTDC (before top dead centre) at idle of 600 RPM. The firing order of the cylinders is 1-8-4-3-6-5-7-2. Oil pressure is 30-70 PSI (pounds per square inch) at 2,000 RPM and 4 PSI at idle. Normal operating temperature of the 7.4L MPI is 71.1 degrees Celsius and is controlled by a thermostat.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.