Reflective tape requirements

Written by daniel westlake
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Reflective tape requirements
Reflective tape must be placed on large commercial vehicles and tractor trailers. (argento image by kisny from Fotolia.com)

Reflective tape is required for large commercial vehicles such as trucks or personal vehicles that are sometimes used for commercial purposes. There are laws and guidelines for where reflective tape should be placed so that other cars on the road can spot them more easily when driving at night.

Other People Are Reading

Colours

The proper colours of reflective tape for trucks and tractor trailers are red and white, as this is what will optimally pick up and reflect the light from approaching headlights at night. Usually 6 inches of each strip of tape is red and 6 inches of the other half is white. These colours switch off intermittently as the tape is unspooled and have varying degrees of reflection power, based upon the quality of the reflective tape.

Placement on Flatbeds

Reflective tape should be placed in specific areas on flatbeds and be visible when they are empty or carrying a box trailer for transport. The tape should be attached along the lower edge of the box trailer, so that it is visible at night from all angles where an approaching vehicle with headlights would be able to see it. The reflective tape should also be attached to the metal hitch on the back of the flatbed, so that vehicles approaching from behind will see two strips of reflective tape, drawing more attention to the presence of the truck.

Placement on Tankers

Large tanker trucks carrying liquids, ranging from milk to gasoline, must also have reflective tape on the truck itself, though in different places and patterns then regular flatbeds or box trailers. While reflective tape should be attached to the back base of the tanker and the metal hitch near the rear wheels, there is no place to put reflective tank on the sides except on the tanker itself. Therefore, strips of reflective tape should be intermittently placed in a straight line along the middle of the tanker's body, so that headlights illuminating the tanker from the side will see numerous dashes of reflective tape, as opposed to one long one. This will help approaching vehicles to recognise it is a tanker truck.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.