Kitchen sinks have standard drain line sizes, which means all sinks manufactured adhere to the same basic dimensions as far as the drain is concerned. Sinks are a common appliance, and therefore standardising the most common features for better functionality and interchangeability just makes sense.
Other People Are Reading
Kitchen Sink Drain Sizes
All kitchen sinks today have the same diameter drain, which is 3 1/2 inches and is larger than a bathroom drain which measures in at 1 1/4 inches. It is the same size as a typical standard shower drain, however. When installing a new drain into the sink, you have no need to shop for certain diameter drains. All drains manufactured will adhere to this standard size. The drain size is not random; it is sized to meet certain needs. The drain line is also sized for functional reasons.
Kitchen Drain Line Sizes
The drain line running to your kitchen sink is also sized to accommodate the water flow from your sink; however, it is not standardised. It must drain off the water dispensed from your faucet and handle the waste that is sent down the drain. So the drain line is usually 1 1/2 inches in diameter. This size drain line is sufficient for kitchen use. A bathroom sink drain line is typically 1 1/4 inches, slightly smaller. Some kitchen sinks experiencing very light use may use this size drain, but it is not recommended. It is the absolute minimum drain line size for any kitchen faucet. Any smaller and the drain line will clog frequently.
Drain Line Setup
Most kitchen sinks have a P-trap drain line, which is an S-shaped piping joint installed right below the sink. The shape of the drain prevents back flow into the sink because the water travels up the side of the P-trap before flowing straight down through the drain, which is common in any sink drain system. Bathroom and bar sinks also use this configuration to reduce back flow. The P-trap is then routed to the drainpipe, which is usually a horizontal pipe routed from the home's drain line to under the sink.
Plumbing a Drain
When plumbing a drain, the 1 1/4-inch drain line is run to the P-trap and then to the main drain line. If the main drain line is larger, a step down adaptor is installed. Main drain lines are designed to handle larger loads and are sized appropriately. Some drain lines run between 1 1/2 to 2 inches in diameter. Each time a pipe is connected to a larger diameter pipe, an adaptor is used to bridge the connection.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for