Interior painting techniques for opal or pearl walls

Written by victoria martin
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Interior painting techniques for opal or pearl walls
Use a thick roller when rolling pearlescent paint onto a textured wall. (Hemera Technologies/ Images)

Faux painting techniques are becoming increasingly popular because of the dramatic effect they create in a room. Opalescent and pearlescent paint are two possibilities to consider for your next interior renovation project. The advantage of using these kinds of paints is that the sheen brightens your room by reflecting some of the light that shines on it.

Other People Are Reading

Subtle Stripes

You can use pearlescent paint to create either subtle or dramatic stripes in a room. For a more subtle effect, choose a pearlescent shade of paint that is close or nearly identical to the colour of base coat you plan to use. Measure your room to determine how wide of a stripe would divide your room evenly. Paint two coats of your base coat, then mark and tape off your stripes. Use a roller to paint on the pearlescent shade of paint.

Rag Rolling

The rag rolling technique creates a marbled effect on a wall. One way to accomplish this is to use a slightly darker colour for your base coat and a lighter opalescent colour for top coat. Wet the rag in clean water, roll it up and roll it lightly through the paint. Roll this over your wall after you have prepared it with two coats of your base coat.

Solid Opalescent Walls

Paint your wall with two coats of a base coat. Choose a colour that is close to the same as the opalescent paint you plan to use. Also paint the ceiling of the room with the base coat. Use a brush or a sponge to paint two layers of the opalescent paint on the walls. Trying painting two opposing walls at a time, taping off the adjacent walls so you do not have an unwanted build-up of paint.

Textured Walls

Use plaster to create a texture on your wall. You can use a spatula or comb to create lines, peaks or radiating circles. Wait until the plaster is dry. Using a thick roller, paint two layers of a base coat over the plastered wall and let it dry. Then paint two layers of a pearlescent paint that is slightly lighter than your base coat over the wall.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.