Upscale consumer appliance maker Miele, whose headquarters is in Gutersloh, Germany, makes a line of dishwashers. If you experience issues with a Miele dishwasher, the manufacturer suggests you conduct a series of troubleshooting procedures in attempt to reconcile minor problems before you spend money by calling out a service repair technician. The troubleshooting steps are relatively simple
Not Turning On
Miele dishwashers have a "Start/Stop" light that flashes after you turn it on. If it doesn't flash, verify that the dishwasher is plugged into an outlet and that you have selected a dishwasher program. Completely close the washer door and press "Start/Stop". If the washer still won't turn on, check the household circuit breaker or fuses. If the fuses are blown out, replace them. Reset the circuit breaker if tripped. If the dishwasher starts, but stops, check the fuses. If your dishwasher won't start at all, open the housing and examine the door switch (four wires connected via a plastic component). Change out the switch if it's corroded or blown.
Inlet/Drain Indicator: Not Filling
The "Intake/Drain" indicator light flashes when your Miele dishwasher has a problem with its water supply. Verify that the water is connected to your dishwasher and that the water inlet valve is completely in the "On" position. If the valve is leaking or defective, replace it. If your tub is not filling with water, clean the water filter and the water inlet hose if clogged. Straighten the hose if kinked. Use a water pressure gauge to check the water pressure. If it's below 20 psi, contact your water supplier or wait for the pressure to return to normal.
Inlet/Drain Indicator: Not Draining
If your tub is not draining, clean the drain pump, filters, air gap and non-return valve. Examine the drainage hose and straighten it if kinked. Open the dishwasher housing; examine the pump and pump belt. If the impeller on the pump is broken, replace the whole pump. If the belt is worn or split, you must get a new one. If you smell an electrical burning smell or the motor doesn't move, replace it.
Remove any old detergent from the dispenser if the dispenser is not closing properly. Only use dry, non-clumping detergent in the dishwasher. If you hear a rattling noise, stop your Miele dishwasher and reposition some of the dishes. The dishes are hitting against each other, which can cause chipping. A knocking noise inside the tub means the spray arm is blocked. Remove any items keeping the arm from moving freely. Use a rinse aid to help with drying and to reduce spots on glasses. Let the cycle completely finish before removing dishes.