Super A Farmall Tractor Specifications

Written by madison rayne
  • Share
  • Tweet
  • Share
  • Email

The Farmall Super A tractor was produced by International Harvester between 1947 and 1954. The Super A models were general-purpose, durable tractors built for strength and versatility, making them well suited for small farming tasks. The Super As had the same engine as the earlier Farmall models F-12 and F-13, yet the Super A engine was positioned to the left of the operator's seat. Approximately 107,000 Farmall Super A models were produced, and they've become a collectors' item for farming enthusiasts.

Other People Are Reading

Dimensions and Capacities

The Farmall Super A had a standard length of 106.8 inches, a width of 55.8 inches and a height 64.25 inches. It had a minimum turning radius of 17 feet, a crop clearance of 20 7/8 inches and a wheelbase -- axle to axle -- of 71.1 inches. The front tires were 5 inches wide with a 15-inch diameter, and the rear tires were 12 inches wide and 24 inches in diameter. The Super A weighed 1089kg. and had an 11-gallon fuel tank capacity.

Engine

The Farmall Super A had an International Harvester classified C113 engine. The Super A engine was gasoline-powered and had four cylinders, a displacement of 113 inches and a compression ratio of 6-to-1. This tractor had a bore and stroke of 3 inches by 4 inches, and the spark plug firing order was 1-3-4-2. The C113 was rated at 1,400rpm and included a liquid cooling system that used water.

Transmission

The Farmall Super A had a two-wheel drive sliding-gear transmission. It had four forward gears ratios and one reverse. The Super A had a speed range from 2.3mph in the first gear to 3.6mph in second gear and 4.8mph in third. Its top forward speed was 10mph in fourth gear, and 2.8mph in reverse.

Additional Features

The Farmall Super A tractors had a "Touch-Control" hydraulics system that enabled operators to raise and lower the rear hitch easily with a single lever. This tractor had an adjustable front axle, 4-ply rated rubber tires and a power take-off system that provided 540rpm. The Super A also featured a universal mounting frame to fit front-mounted implements, and a reversible drawbar for rear-mounted or pull-type implements. Farmall Super A tractors were manufactured in Louisville, Kentucky and Chicago, Illinois, and cost £910 in 1954.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.