Dewalt DWS7085 Installation

Written by ashton daigle
  • Share
  • Tweet
  • Share
  • Email

As one of the foremost leaders in the production of electric and battery-powered tools, Dewalt manufactures several models of mitre saws. A mitre saw is a saw designed to make intricate crosscuts. Mitre saws consist of a base and a swivel control arm that houses the blade. The Dewalt DWS7085 is a work light system that attaches to the top of your Dewalt mitre saw's control arm. The light helps illuminate cutting areas and casts straight cutting shadow lines that you can use to help guide your blade by. Installation of the DWS7085 work light is an easy process that should only take about 15 minutes.

Other People Are Reading

Safety

Ensure that your Dewalt mitre saw is unplugged. If it is not, unplug it.

Preparation

Remove the two screws holding the dummy cover in place, and pull the dummy cover off to expose the wire connections. You'll find the dummy cover located on the top of the handle.

Connections

You should connect the plugs from the work light's power box to the connectors accessed under the dummy cover, and replace the two screws to hold the light's power box in place.

Light Installation

Slide the plastic blade guard down to remove the four screws holding the black, plastic stopper in place. Remove the stopper, and plug the light assembly into the plug beneath the stopper. You can mount the light by replacing the four screws.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.