How to Fix a Broken Boxspring

Written by jeffery keilholtz
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Fix a Broken Boxspring
Fit a box spring and mattress into a sturdy frame. (Hemera Technologies/ Images)

You must fix a broken box spring right away to ensure a good night's sleep. Your bed may become uneven or uncomfortable due to manipulated springs, or the bed itself may squeak whenever pressure is applied. Maintaining a reliable box spring not only saves you the time and money of making a fresh purchase, but it also eliminates a significant disruption to rest and relaxation.

Skill level:
Moderately Easy

Things you need

  • Wrench
  • Socket set
  • Screwdrivers
  • Metal lubricant
  • Clean rag
  • Bucket
  • Warm water
  • Mild detergent
  • Safety glasses
  • Work gloves
  • Dust mask
  • Butane torch
  • Pliers
  • Polyester padding
  • Plywood board
  • Plastic ties
  • Staple gun
  • Industrial staples

Show MoreHide


  1. 1

    Reduce or eliminate squeaky noises. Remove the mattress, covers and padding. Apply pressure to the box spring. Listen for "squeaking" sounds. Remove all necessary bolts and screws with a wrench, socket set or screwdriver. Spray screws, bolts and framing pieces with metal lubricant, such as WD-40. Reinsert and tighten all previously removed bolts and screws.

  2. 2

    Fix faulty springs. Pull the box spring into a garage, basement, car port or other well ventilated area with a concrete surface. Mix warm water and mild detergent in a bucket. Put on a dust mask and wash the box spring free of grease, oils, dirt and other residue. Slide on safety gloves and glasses. Ignite a butane torch. Hold the torch flame 1 to 3 inches from faulty springs---so the flame tip is touching. Move the flame back and forth to heat the spring. Turn off the torch once the spring is red hot. Manipulate the spring back into shape using a pair of pliers.

  3. 3

    Pad an uneven box spring. Layer the box spring with a plywood board---fitted to the dimensions of the box spring---or polyester padding to even out the surface area. Apply at least two layers of polyester padding if you lay down a plywood board. Secure polyester padding with plastic ties or industrial staples.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.