Lego bricks can be assembled and connected in a variety of ways to create vehicles, buildings and robots. Depending on what you create, Lego pieces can be pricey. However, building a Lego safe doesn't require many pieces. Assembling a mini-safe with LEGO pieces is fun and simple. All you need is the right pieces in any colour you desire.
- Skill level:
Other People Are Reading
Things you need
- Gray 2-by-4 plate
- Dark grey 2-by-4 plate
- 1-by-2-by-2 brick (2)
- Dark grey 1-by-2 hinge brick (lower part & upper part attached)
- 1-by-2 brick
- 1-by-2 technic brick
- 1-by-2 hinge plate piece (lower part & upper part attached)
- Dark grey 1-by-3 plate
- Dark grey 1-by-1 plate
- 1-by-2 "No. 90"
- 3 M.Arch W.Knob And Shaft Ø3.2
- 2-by-2 flat tile
- Steering wheel
- 1-by-2 radiator grille (2)
Lay a 2-by-4 plate on a flat surface. Connect a 1-by-2-by-2 brick on the middle two lumps of the four lumps on one side of the 2-by-4 plate.
Attach another 1-by-2-by-2 brick on the two lumps at the edge of the same 2-by-4 plate. One 1-by-2-by-2 brick should be facing and touching the other 1-by-2-by-2 brick.
Connect the lower and upper part of the 1-by-2 hinge brick together. Attach one of the 1-by-2 hinge brick on the two lumps on the other edge of the 2-by-4 plate. The other 1-by-2 hinge brick should swing out like a door.
Attach a 1-by-2 technic brick on top of the 1-by-2 hinge brick that is not attached to the plate. This will act as the door of the safe.
Insert the "3 M.Arch W.Knob And Shaft Ø3.2" into the hole of the 1-by-2 technic brick. This will act as a knob for the door.
Connect a 1-by-2 brick on top of the 1-by-2 hinge brick that is connected to the 2-by-4 plate.
Place a dark grey 1-by-3 plate on both lumps of the 1-by-2-by-2 brick that is on the side of the 2-by-4 plate and on one lump of the 1-by-2-by-2 brick that is on the edge of the 2-by-4 plate.
Attach the lower part and upper part of the dark grey 1-by-2 hinge plate pieces together. Connect one part of the 1-by-2 hinge plates on the two lumps of the 1-by-2 brick that is on top of the 1-by-2 hinge brick that is connected to the plate. Connect the other 1-by-2 hinge plate on top of the 1-by-2 technic brick that is attached to the hinge brick (the door).
Attach a dark grey 1-by-1 plate on the lump of the 1-by-2-by-2 brick on the edge of the 2-by-4 plate.
Connect a dark grey 2-by-4 plate on top of the whole Lego pieces excluding the swinging door. Attach a 2-by-2 flat tile in the middle of the dark grey 2-by-4 plate.
Add other accessories. Connect a 1-by-2 "No. 90" piece on top of the swinging door. Attach a 1-by-2 radiator grille on the sides of the 2-by-2 flat tile. Connect the steering wheel to the knob on the door.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for