How to Build a Model of a Bastille

Written by jeffery keilholtz
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Build a Model of a Bastille
The Bastille was stormed on July 14, 1789. ( Images)

Building a model of the Bastille is a way to create a visual display of the 18th century Parisian centrepiece. The Bastille was a rectangular brick complex, surrounded by eight pillars, used to hold political prisoners. Townspeople ended up storming the Bastille and freeing the prisoners in a bloody battle against French soldiers. Set up pictures of the Bastille before building your model to add inspiration as you proceed.

Skill level:
Moderately Easy

Things you need

  • Cardboard
  • Measuring tape
  • Scissors
  • Marker
  • Paint
  • Glue
  • Paper towel holders
  • Foam cubes
  • Twine or chain
  • Low-density polythene

Show MoreHide


  1. 1

    Make the four walls and roof. Measure and cut five pieces of cardboard at 12-inches by 10-inches. Draw or paint a brick pattern on four of the five pieces. Cut out a downward U shape curve on the front wall. Assemble the four sides with the brick pattern into an upright, three-dimensional square. Glue the corners of each side together. Glue the remaining cardboard piece to the top of the square as the castle roof.

  2. 2

    Create the eight pillars. Cut four, 12-inch tall cardboard paper towel holders straight down the middle -- so you end up with eight, long halves. Draw or paint brick patterns and windows on the outer surface of each half. Cover and glue one half onto each Bastille corner. Glue each remaining half at the centre of each of the four walls.

  3. 3

    Cut and paint 1/2-inch cubes of hard or soft foam. Glue the cubes around the perimeter of the roof -- leaving 1/2-inch in between each cube -- to create the facade of the roof line.

  4. 4

    Take the u-shaped piece of cardboard you cut out and lay it down flat in front of the wall opening. Glue the bottom corners of the drawbridge to the base of the Bastille. Cut and glue two strands of twine or faux chain to the top corners of the drawbridge and upper corners of the front wall opening. Cut in half and glue low-density polythene bottles -- plastic water bottles, for example -- to the outer base of the Bastille. Be sure the drawbridge is positioned over top the polythene. Fill the polythene with water to create the Bastille moat.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.