How to make a small harp

Written by megan shoop
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to make a small harp
Harps have a long history as travellers' instruments. (Hemera Technologies/PhotoObjects.net/Getty Images)

The word "harp" may conjure up images of tall, elaborately carved instruments requiring plenty of muscle and determination to play them. However, harps have been traditional instruments for travelling bards and musicians for centuries. Small lap harps exist in traditional Irish, Scottish and Greek instrument sets. Travellers slung these small harps on their backs and used them to make money on the road. You can emulate these talented travellers by building your own small harp.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Wooden clothes hanger
  • Wire cutters
  • High-speed rotary tool
  • Cutting wheel
  • Electric hand drill
  • 1/16 diameter drill bit
  • Nylon thread
  • Scissors
  • ½ inch diameter jump rings
  • 10mm wooden round beads

Show MoreHide

Instructions

  1. 1

    Place a wooden clothes hanger in front of you with the hook facing you. You can get large packs of these hangers at most department stores or home accessory stores. They should be about 1 inch thick and have heavy curves in the shoulders.

  2. 2

    Snip away the hook with wire cutters. Some hangers have hooks that screw in; these you may simply unscrew and discard or save for another project.

  3. 3

    Cut away the straight crossbar at the bottom of the hanger with a high-speed rotary tool and cutting wheel. If you don't have a rotary tool, you may also use a small saw, like a coping saw. Work slowly and cut the bar as close to the ends of the hanger as possible.

  4. 4

    Drill three to nine holes straight down through the left arm of the hanger, keeping the drill very straight. Space the holes about ½ inch apart. Repeat on the right arm, checking if the holes are directly across from each other.

  5. 5

    Cut one piece of nylon thread for each pair of holes. Tie one end of each thread to a ½ inch jump ring (metal ring for jewellery making) and string it down through on of the holes on the left arm.

  6. 6

    Slip the other end of each thread through the corresponding hole in the hanger's right arm. Slide a 10mm wooden bead onto the other end of each nylon thread, pull the thread tight, and knot it against the end of the bead. Cut away the excess thread.

  7. 7

    Pluck each string and tune the harp by turning the jump rings. The more you twist, the tighter the threads will become.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.