# How to Read the Polar Curve of a Luminaire

Written by richard gaughan
• Share
• Tweet
• Share
• Pin
• Email

Luminaire is just a fancy word for light fixture. The amount of light put out by a traditional luminaire depends both on the fixture design and the light source within the fixture. Solid state lighting with light-emitting diodes is a different story. The lines between light source and luminaire are not distinct, so luminaire output is even more important than ever. That's why specifications of the lumen distribution are part of the Energy Star requirements for solid state luminaires. Lumen distribution is reported on polar plots.

Skill level:
Moderately Easy

• Polar plot

## Instructions

1. 1

Identify the angles. The origin of the polar plot represents the position of the luminaire. Usually, the origin is not centred on the plot, but offset to show the light distribution for one half of space.

2. 2

Find the radial scale. The distance from the origin will be illustrated with a series of concentric arcs about the origin. Each arc will be labelled with a value, almost always representing lumens, a measure of light brightness.

3. 3

Investigate the shape of the curve, finding the radial distance for a given angle. For example, at 0 degrees, straight down from the source at the centre, the output curve will be a certain distance from the origin. That represents the brightness of the source when viewed from straight underneath.

4. 4

Follow the path of the curve, noting the value at each angle. The value of the curve --- the radial value at each angle --- represents the brightness of the source when viewed from that angle. An incandescent bulb, for example, would be almost a circle, meaning it's just about as bright when viewed from every angle. A spotlight's curve will be shaped somewhat like a daisy petal, with a high value at 0 degrees, maybe half that value at -9.44 degrees C, then going to zero by 20 degrees or so.

5. 5

Note the presence of any additional curves and look at the legend to interpret the distribution. If there is only one curve, it means that the light distribution would stay the same as the luminaire was rotated. If there's another curve, say one labelled "90 degrees," that represents how the light would appear if the source was rotated by 90 degrees.

### Don't Miss

#### References

• All types
• Articles
• Slideshows
• Videos
##### Sort:
• Most relevant
• Most popular
• Most recent

No articles available

No slideshows available

No videos available