How to Wire the VOX Pathfinder V9158 Guitar Amp

Written by robert ceville
  • Share
  • Tweet
  • Share
  • Email

The VOX Pathfinder V9158 must be properly wired in order to use this travel-sized guitar amplifier at its maximum potential. The VOX Pathfinder V9158 features 15 watts power, along with an internal tremolo effect. The amplifier comes equipped with line in, foot switch and extension speaker jacks on its housing by design. These jacks allow you to plug in your guitar, a foot switch for turning the tremolo effect on or off and an external speaker for expanding the sound being produced. Wire the VOX Pathfinder V9158 in less than five minutes.

Skill level:

Other People Are Reading

Things you need

  • 1/4 inch instrument cable
  • Guitar
  • Foot switch pedal
  • 1/4 inch speaker cable

Show MoreHide


  1. 1

    Plug one end of a 1/4 inch instrument cable into your guitar's output jack, then the other end into your VOX V9158's "Input" jack. This will establish the connection between your instrument and your amplifier.

  2. 2

    Plug your foot switch pedal cable into the amp's "Foot Switch" jack. The foot switch pedal will now allow you to toggle between the tremolo effect sound and the dry sound.

  3. 3

    Plug one end of your speaker cable into the "Extension Speaker" jack on the back of the amplifier, and the other end into your speaker cabinet's "Input" jack. This type of connection allows you to send the processed amplification signal to another speaker, in addition to the one included in the amp internally.

  4. 4

    Plug the amplifier's power cable into an available wall outlet to complete the wiring. The V9158 is now ready to be amplify your guitar performance as it was intended.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.