The KM-3050 is a multifunctional colour printer and scanner manufactured by Kyocera. Because of its size, the device is best suited for office use and can print approximately 30 standard-size pages per minute. It also can be programmed to automatically punch holes into pages and fold pages into booklets. If you experience malfunctions and difficulty using the Kyocera KM-3050, troubleshoot it to diagnose and solve the problem before seeking professional repair or replacing the device.
- Skill level:
- Moderately Easy
Other People Are Reading
Check the screen for an error message. If the message reads "Add paper in cassette # 1," refill the top paper cassette. Do the same with the bottom paper cassette if the message reads "Add paper in cassette # 2." The paper cassettes are the two pull-out trays located at the bottom of the printer.
Add paper to the Multi Purpose Tray if the error message reads "Add paper in MP tray." Make sure that the paper you load into the tray is the type and size indicated on the screen.
Replace the device's toner cartridge if the message reads "Add toner." Contact the supplier you purchased the device from for information about toner replacements and refer to the device's Operation Guide for detailed instruction on how to remove and replace the cartridge.
No Printing When "Start" Button is Pressed
Adjust the device's density mode. Select "Image Quality" on the device's touch screen and choose "Density" from the menu.
Select a number on the screen, -3 being the lightest and +3 being the darkest, to adjust the ink density.
Press "OK" to exit the Density menu and try printing again.
Printouts are Too Light or Too Dark
Clean the device's paper separator as this may be causing the printouts not to eject smoothly. Open the front cover of the device and remove the blue cleaning brush located to the left.
Push up and hold the lever on "Left Cover 1" and open the cover to reveal the separator.
Remove the dirt from the separator by carefully brushing it from sided to side with the cleaning brush. Keep brushing until there are no more signs of dirt or debris.
Return the cleaning brush to its original place and close "Left Cover 1" securely by pressing the area that says "Push" on the cover. Close the front cover of the device and try printing again.
Printouts are Wrinkled
Tips and warnings
- If you continue to experience problems with the KM-3050 after troubleshooting it, contact Kyocera Technical Support at (800) 255-6482 or online through the company's "Contact Us" page.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for