Hth Pool Test Kit Instructions

Written by michele norfleet Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Hth Pool Test Kit Instructions
Pool water sparkles when the chemicals are maintained. (Jupiterimages/Pixland/Getty Images)

A sparkling swimming pool is a welcome sight on a hot summer day. In order to keep your backyard pool in good condition and safe for swimming, it is essential to test the pool chemicals on a regular basis. Hth test kits are available with six-way tests to give you a measure of your pool water's pH, free chlorine or bromine, total alkalinity, calcium hardness and cyanuric acid/stabiliser. Three-way test kits and strips measure only pH, total chlorine or total bromine.

Skill level:
Easy

Other People Are Reading

Things you need

  • hth three-way test kit
  • hth six-way test kit

Show MoreHide

Instructions

    Three-Way Test Kits

  1. 1

    Test chlorine or bromine levels daily, depending on the chemical you use in your pool. Fill the chlorine/bromine compartment of the receptacle to the fill line.

  2. 2

    Place five drops of OTO liquid testing reagent into the indicated compartment. Hold the bottle vertically when adding the drops. Place the plastic cap over the compartment. Invert the receptacle several times to mix the testing drops into the water.

  3. 3

    Compare the colour of the water with the colour standard chart to determine your chlorine/bromine level. The ideal level is two to four parts per million for chlorine or four to six parts per million for bromine.

  4. 4

    Test the pH level of your water daily. Fill the compartment with pool water to the fill line.

  5. 5

    Add five drops of phenol red to the compartment. Replace the cap and invert the receptacle to mix.

  6. 6

    Compare the colour of the water with the pH colour chart. A pH level of 7.2 to 7.6 is the recommended level.

    Six-Way Test Kits

  1. 1

    Test chlorine or bromine and pH as indicated for three-way test kits.

  2. 2

    Test total alkalinity weekly. Fill the receptacle with pool water to the 25ml mark. Add five drops of the alkalinity test reagent to the water. Place the plastic cap over the compartment. Invert the receptacle to mix the contents. The water should turn green.

  3. 3

    Add the alkalinity reagent one drop at a time. Invert to mix after each addition. Continue to add the reagent until the water turns from green to red. Count the drops added. Multiply the number of drops added by 10 to determine the alkalinity in parts per million (PPM). The recommended level is between 60 and 120 PPM.

  4. 4

    Test for calcium hardness weekly. Fill the appropriate compartment with pool water to the 25ml mark.

  5. 5

    Add five drops of the hardness test reagent. Place the plastic cap on the compartment and invert it to mix its contents.

  6. 6

    Observe the colour of the mixture. The water will be red if hardness is present.

  7. 7

    Add the hardness titrant one drop at a time until the water turns from red to blue. Count the drops. Multiply the number of drops by 10 to determine the calcium hardness in parts per million. The ideal level is from 200 to 500 PPM.

Tips and warnings

  • Test cyanuric acid/stablilizer twice a season, using the special procedures indicated with your test kit.
  • Always rinse the test receptacle with pool water after each test.
  • Cap the test reagents after use.
  • Use your daily and weekly test results to add the recommended chemicals to your pool.
  • Wait 24 hours after adding a shock treatment to the water before testing.
  • Store test kits and strips out of direct sunlight.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.