How to Calculate the Centroid of a T-Beam

Written by petra wakefield
  • Share
  • Tweet
  • Share
  • Email

If you could place the centroid of an object exactly on the point of a pencil, the object would stay balanced. This is because the centroid lies at the centre of mass. Engineers often use this property when designing buildings and roads. Knowing the centroids of various building beams helps the builders calculate how much stress each beam will take. For a T-beam, you only need to calculate the vertical centroid. Because a T-beam is symmetrical about the y-axis, the horizontal centroid lies along the y-axis that passes through the centre of the beam.

Skill level:
Moderately Challenging

Other People Are Reading

Instructions

    Cross Your T

  1. 1

    Calculate the area of the T-beam. Multiply the width by the length for each section of the T. Record the areas of each section for use in later calculations. Add the areas together to get the total area. For example, if the T is 10 inches tall and 2 inches wide, multiply to get 20 square inches. If the top bar is 8 inches long and 2 inches thick, multiply to get 16 square inches. Add the areas together for a total area of 36 square inches.

  2. 2

    Divide the width of the top bar by two and add this number to the height of the T to find the height of the centre of the bar. If the width is 2 inches and the height is 10 inches, 2 inches divide by 2 plus 10 inches equals 11 inches. Multiply the height by the area of the top bar to find its moment of inertia. If the area is 16 square inches, 11 inches times 16 square inches equals 176 cubic inches.

  3. 3

    Divide the width of the vertical bar of the T by two. If the width is 2 inches, divide by 2 to get 1 inch. Multiply the width by the area of the vertical bar to find its moment of inertia. If the area is 20 square inches, 1 inch times 20 square inches equals 20 cubic inches.

  4. 4

    Add the moment of inertia for the top bar to the moment of inertia for the bottom bar to get the total moment of inertia for the T-beam. For example, 176 cubic inches plus 20 cubic inches equals 196 cubic inches.

  5. 5

    Divide the total moment of inertia by the total area to find the y-centroid for the T-beam. For example, 196 cubic inches divided by 36 square inches equals 5.44 inches. This means the y-centroid lies along a horizontal axis 5.44 inches above the bottom of the T-beam.

Tips and warnings

  • Make sure all the units are consistent. If the width is in inches but the height is in feet, for example, convert the height to inches before beginning the calculation.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.