How to Install the Mad Catz Wireless Adapter to the XBox 360

Written by andrew todd Google
  • Share
  • Tweet
  • Share
  • Email

The Mad Catz Wireless Network Adapter for Xbox 360 allows you to connect your Xbox 360 to a wireless router for online gaming using Xbox Live and for sharing media such as movies, music and pictures. This adaptor connects to the Xbox via the console's Ethernet port, rather than through a USB port. Prior to connecting the wireless adaptor to your Xbox 360, you must configure it on your computer.

Skill level:

Other People Are Reading

Things you need

  • WPS-capable wireless router

Show MoreHide


  1. 1

    Insert the installation CD into your computer's CD or DVD drive and allow the Installation Guide to load.

  2. 2

    Plug the wireless adaptor's power cord into the wall outlet, then press the power button on the adaptor to turn on the adaptor. Click "Next" to proceed with the installation.

  3. 3

    Plug the Ethernet cable that is included with the adaptor into the Ethernet port on the rear of the adaptor. Plug the other end of the Ethernet cable into the Ethernet port on your computer. If another cable is plugged into your computer's Ethernet port, unplug it. Click "Next" to proceed with the installation.

  4. 4

    Open the "Start" menu (click the Windows-logo button on the lower-left-hand corner of the screen) and then click "Control Panel." Click "Network and Sharing Center" from the Control Panel window and then click "Change Adapter Settings" on the left pane of the screen. Right-click on your Ethernet adaptor and then click "Properties." Select "Internet Protocol" and then click "Properties." Click the radio button beside "Use the following IP address" and then enter "" into the "IP Address" field. Enter "" in the "Subnet Mask" field, located below the "IP Address" field. Click "OK" to save your settings.

  5. 5

    Press the "WPS" button, located on the top of your router. The WPS button has either an icon of a closed lock or two circular arrows.

  6. 6

    Press and then release the "WPS" button located on the wireless adaptor to connect the adaptor to the router.

  7. 7

    Disconnect the Ethernet cable from the rear of the computer and plug it into the Ethernet port on the rear of the Xbox 360 to complete the installation.

  8. 8

    Plug the original Ethernet cable back into your computer, if it was removed.

  9. 9

    Return to the "Internet Protocol Properties" screen on your computer. Click the radio button labelled "Obtain an IP address automatically," or enter the original IP address and subnet mask. Click "OK." Close all windows.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.