How to Seal Plywood Seams

Written by cody sorensen
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Seal Plywood Seams
Seal the seams before flooring, roofing or siding is installed. (Jupiterimages/ Images)

Plywood used as a subfloor, wall underlayment or roof sheathing needs to have the seams sealed with caulk. By sealing these seams, moisture, insects, dust and air can't permeate into a home. Unsealed seams diminish the effectiveness of the cooling and heating systems of a home which can adversely affect utility costs. Plywood has four sides that need to be sealed regardless of the material they butt up against. An exterior elastomeric caulk works best, because it has the ability to expand and contract with the temperatures and flexing of a structure.

Skill level:

Other People Are Reading

Things you need

  • Elastomeric caulk
  • Utility knife
  • Caulking gun
  • Painter's rag

Show MoreHide


  1. 1

    Cut the tip off of a tube of elastomeric caulk using a utility knife. Insert the tube into a caulking gun and pull the trigger until you see caulk come out of the nozzle. The caulking gun is loaded and ready for action.

  2. 2

    Squirt a 3/8-inch bead of caulk along the seams of the plywood. Squish the bead into the seam with your finger and then wipe excess off with a wet painter's rag.

  3. 3

    Wait 24 hours. During this time, the caulk has a tendency to shrink while drying. Inspect the seams for areas where the caulk shrunk and left the seam unsealed. Apply more caulk in these areas.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.