How to Fix a Brita Filter Faucet Mount That Keeps Falling Off

Written by maxwell payne
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Fix a Brita Filter Faucet Mount That Keeps Falling Off
Note the aerator tip on the faucet that can be unscrewed. (Jupiterimages/Polka Dot/Getty Images)

The Brita Filter Faucet mount is a device that connects directly to your sink faucet and contains a Brita water filter inside it. The water flows directly from the faucet through the filter before coming out of the filter into your drinking glass. If not properly installed or fitted, the filter unit can leak or fall off the faucet completely. Proper installation is required to ensure the filter works and stays mounted to the faucet tip.

Skill level:
Moderately Easy

Other People Are Reading


  1. 1

    Untwist or slide off the Brita faucet filter unit from the faucet. Remove the aerator from the faucet tip if it's still in place. The aerator is a small piece on the bottom of the tip of the faucet. Grasp the bottom of it and twist until it comes off. Brita faucet filters will not stay on if the aerator is in place.

  2. 2

    Replace the filter unit back onto the faucet.

  3. 3

    Inspect the tip of the faucet looking at the threading around the sides of the tip. If the threading isn't visible, it's on the inside. This means the filter unit can't securely screw into place and needs an adaptor.

  4. 4

    Take one of the adaptors that came with the Brita faucet filter that screws into the faucet tip. Place one of the included rubber washers of the same size into the top portion of the filter unit where the filter unit connects to the faucet. Screw the adaptor onto the faucet tip.

  5. 5

    Screw the filter unit tightly onto the adaptor connected to the faucet tip. Turn on the water to verify the adaptor is the proper size and securely in place. If water leaks out, remove the entire unit, and install another adaptor or readjust the existing one before putting the Brita unit back in place.

Tips and warnings

  • Don't force an adaptor into place or screw the filter unit too tightly as this can cause the plastic of the unit or adaptor to crack.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.