The heat generated by fluorescent lights and the naturally rising hot air ages fluorescent light covers, turning them yellow and brittle. Replacing the 4-bulb fluorescent light cover depends upon the style and brand of the fixture itself. Some fixtures can use a universal cover, while others must use one manufactured specifically for the fixture. When you replace the cover on your fluorescent fixture, take the time to find one that best fits your fixture. Don't settle for something that almost fits.
- Skill level:
- Moderately Easy
Other People Are Reading
Things you need
- Phillips or slotted screwdriver
- Tape measure
- Plastic sheet cutter
- Straight edge
- Wrap-around light cover
Purchase a 2 by 4-foot acrylic fluorescent light cover. The universal size of this light cover fits nearly all 4-bulb fluorescent troffers.
Hold the flat cover at an angle and slide it into the troffer if your fixture has a decorative box around it. Bend the cover slightly to get the cover to fit past the lip of the troffer if necessary. Release the cover to sit flat against the bottom of the fixture.
Open the 4-bulb fluorescent light fixture if a thin metal frame secures the cover in place. The frame secures to the fixture with small screws or metal tabs that lock the frame to the fixture.
Lay the 2 by 4-foot acrylic light cover into the frame. Close the frame on the fixture and secure it with the screws or metal tabs.
Trim the acrylic light cover to fit your 4-bulb fluorescent fixture if necessary. Measure your fixture, then transfer the measurements to the flat acrylic cover. Run a plastic sheet cutter along the light cover 7 or 8 times to score it. Use a straight edge to keep your score lines straight. Place pressure on either side of the score line to pop the acrylic apart along the score line. Install the trimmed fluorescent light cover into the 4-bulb fixture.
Flat Light Covers
Take the original wraparound 4-bulb fluorescent light cover with you to a lighting supply store or home improvement centre if you have it. Take measurements of your fluorescent fixture if you do not. Measure the width, length and depth of the fixture.
Match your original cover to a replacement cover for shape and size at the lighting store or home improvement centre. Confirm that the replacement cover will fit your fixture's measurements.
Install the replacement wraparound light cover onto your 4-bulb fluorescent fixture. Hook the side of the cover around one side of the fixture. Wrap the cover around the fixture and hook the opposite side of the cover to the opposite side of the fixture. Since wraparound covers are not universal, you may need to contact the manufacturer of your fixture for a new cover if the cover you purchased does not fit.
Wrap-Around Light Cover
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for
- AcuityBrands; Lithonia Lighting; Low-Profile Wraparound Features & Specifications; October 2009
- AcuityBrands; Lithonia Lighting; Modular Commercial M 2X4 Features & Specification; March 2010
- AcuityBrands; Lithonia Lighting; Specification Premium Air-Handling Troffer Features & Specification; October 2007
- San Diego Plastics: PolyCast Acrylic--Material of a Thousand Uses