How to set the lnb frequency on a satellite

Written by ben david
  • Share
  • Tweet
  • Share
  • Email

The LNB (low-noise blocking) module on a satellite antenna captures the satellite programming signals and channels them to the satellite receiver devices. These modules are angled to have an unobstructed view, or line-of-sight, in the direction of the satellite. A satellite scan can then be run by the satellite receiver to fix or set the LNB frequency to the satellite. The process is pretty straightforward.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • RG-6 coaxial cable

Show MoreHide


  1. 1

    Plug the RG-6 cable into the "Cable" port on the base of the main satellite antenna assembly, just below the LNB module, then plug the other end of the cable into the "Antenna" port on the back of the satellite receiver.

  2. 2

    Press the "Power" button on the satellite receiver remote control to turn it on, then press the "Power" button on the television to turn it on.

  3. 3

    Press the "Program" (or equivalent) button on the receiver to open the "Program Setting" screen on the television.

  4. 4

    Press the "Run Scan" (or equivalent) button on the receiver remote control to initiate the satellite scanning process. The receiver will automatically run the scan and set the frequency of the LNB module. Once the process is complete, a completion prompt will appear on the display screen.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.