How to Repair Masonite Siding With Putty

Written by april dowling
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Repair Masonite Siding With Putty
Repair Masonite hardboard siding using basic supplies like this trowel. ( Images)

Recognised for its density, strength and traditional wood appearance, Masonite hardboard is a partially synthetic alternative to solid wood. Masonite siding is primarily composed of wood fibres, glue resins and wax. Unlike natural wood, Masonite hardboard does not shrink, blister or swell. Masonite siding is, however, affected by moisture and is susceptible to deterioration. Holes are a prominent problem with Masonite siding. Promptly repair holes in Masonite hardboard to prevent moisture from further permeating the siding and compromising its structural integrity. Fortunately, you can repair Masonite hardboard siding with wood putty.

Skill level:

Things you need

  • Stiff-bristle brush
  • Wood putty
  • Trowel
  • Medium-grade sandpaper
  • Paintbrush
  • Exterior house paint

Show MoreHide


  1. 1

    Clean the hardboard with a stiff-bristle brush. Scrub the brush around the hole to dislodge dirt and debris.

  2. 2

    Pack wood putty into the hole using a trowel. Slightly overlap the putty onto the surrounding hardboard by 1 inch. Completely compress the putty into every depression.

  3. 3

    Level the wood putty, using the trowel, to make the repair aesthetically appealing. Leave about 2mm of excess putty for sanding purposes.

  4. 4

    Leave the wood putty to dry for the time span indicated on the product's label.

  5. 5

    Sand the dried excess putty using medium-grade sandpaper. Make the dried wood putty thoroughly flush and level with the encompassing siding.

  6. 6

    Scrub the smoothed putty with the brush to remove sandpaper dust.

  7. 7

    Paint the dried putty to match the hardboard siding. Using a paintbrush, apply two coats of exterior house paint over the putty to hide the repair. Let each coat of paint dry individually as instructed by the manufacturer.

Tips and warnings

  • Apply the wood putty in layers when filling holes exceeding 1cm. in depth. Let each individual layer thoroughly dry before applying the next layer.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.